topblog Ivoire blogs

19/08/2017

What to do if ICOM A2 prompt “The connection to ISIS is lost”

When I was doing programming with ICOM A2, i cut off the power by accident and then it prompts that “The connection to ISIS is lost..”

icom-a2- ISIS-connection-lost-solved
Possible reasons given:
– ISIS is restarting right now
– ISIS is down
– Networkconfig of the ISIS has changed

Advice given by the system:
– Wait until ISIS is available
– Solve problem of the ISIS (maybe call support)
– Change offline mode

Solution by professional technician at obd2tool.com
Click OK.

10-1

Click here (marked with red).
10-2

Select “Direct cable”.
10-3

Switch connection mode to XOVER in progress…
10-4
Click OK.
10-5

Click OK.
10-6

Click here (marked with red)
10-7
Device is configuring. Do not change anything on network. Network changes may cause an inconsistant system and requires a reboot.
10-8

If you see the interface below, it means that you succeed in settling “connection to ISIS is lost”
10-9
Done.
Note:
Tips above are mainly available for China BMW ICOM A2+B+C.

 

http://cheapobd2tool.com/2017/08/18/what-to-do-if-icom-a2-prompt-the-connection-to-isis-is-lost/

Les commentaires sont fermés.