topblog Ivoire blogs

19/08/2017

What to do if ICOM A2 prompt “The connection to ISIS is lost”

When I was doing programming with ICOM A2, i cut off the power by accident and then it prompts that “The connection to ISIS is lost..”

icom-a2- ISIS-connection-lost-solved
Possible reasons given:
– ISIS is restarting right now
– ISIS is down
– Networkconfig of the ISIS has changed

Advice given by the system:
– Wait until ISIS is available
– Solve problem of the ISIS (maybe call support)
– Change offline mode

Solution by professional technician at obd2tool.com
Click OK.

10-1

Click here (marked with red).
10-2

Select “Direct cable”.
10-3

Switch connection mode to XOVER in progress…
10-4
Click OK.
10-5

Click OK.
10-6

Click here (marked with red)
10-7
Device is configuring. Do not change anything on network. Network changes may cause an inconsistant system and requires a reboot.
10-8

If you see the interface below, it means that you succeed in settling “connection to ISIS is lost”
10-9
Done.
Note:
Tips above are mainly available for China BMW ICOM A2+B+C.

 

http://cheapobd2tool.com/2017/08/18/what-to-do-if-icom-a2-prompt-the-connection-to-isis-is-lost/

Autel MaxiDiag MD808 Pro support function of EPB/ Oil Reset/ DPF/SAS and BMS

Autel maxidiag MD808 pro at OBD2TOOL is the newest autel scanner. If you have general repair shops (Perfect for servicewriters), body shops, used car dealerships, auto repair shop, brake facilities,DPF Auto Repair shop, and transmission repair shops,  autel md808 pro is your best choice for repair cars .

it support multi- function as following :

Support Read/Clear Codes and Live Data functions for ALL systems

Read and clear trouble codes, control and test BMS/Oil Reset/ SRS/EPB/DPF systems

Support oil service reset

Support battery registration and reset

Diesel particulate service including forced regeneration

Reset steering angle sensor (SAS) functionality

Relearn parking brake pad after replacement

Reset service mileage and service intervals

Turn off ECU brake warning light

Perform O2 monitor, on-board monitor, I/M readiness and component testing

Global OBD II coverage for U.S. domestic, Asian and European makes and models

All OBD II protocols, all 10 test modes and enhanced OBD II mode 6 support

1-2

autel maxidiag md808pro are  available all over the world. you can use it anywhere.  it update online free . Comparing with MD802 , Autel MD808 pro is not just a Car Diagnostic Tool, but a professional service tool to service individual specialized systems, including Oil Reset, EPB, SAS, BMS and DPF

1-1

autel maxidiag md808 pro with many advantage:

Brand New Design: Autel MaxiDiag MD808 PRO, a revelation in diagnostic and service tool is launched with brand–new exterior in terms of design, structure and buttons;

Efficient Diagnosis: Offer more advanced features and functions to troubleshoot basic four systems (Engine, Transmission, SRS and ABS) for major vehicles on the road today;

Professional Service Tool: Loaded with enhanced service functions, such as oil reset, EPB, SAS, BMS and DPF, offers quick and easy solution to everyday task in the workshop;

Powerful Hardware: Included with 16G Micro SD Card, full color 800*480 display to take your diagnostic experience to a whole new level;

1-31-4

 

http://cheapobd2.com/2017/08/14/autel-maxidiag-md808-pro-support-function-of-epb-oil-reset-dpfsas-and-bms-2/

 

13/08/2017

(How-to guide) SKP900 program Honda CRV key when all key lost

SKP900 key programmer is Hand-held OBD2 key programmer,supports all key lost for many different car brands. This blog will show you how SK-P900 program Honda CRV key when all key lost.

Step1. Choose “Immobilizer”→ “Honda”→ “System Type”→ “Immobilizer 2”.

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-1.jpghttp://forobd2tool.com/wp-content/uploads/2017/08/1/4-2.jpg

Step2. Choose “Immobilizer System” and turn ignition on. Wait a minute for system adapting.

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-3.jpg

Step3. Choose “All key lost”

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-4.jpg

It will ask “Insert key and turn ignition on, indicator light off?” Check and confirm it.

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-5.jpg

Step4. Input key number: 2

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-6.jpg

Turn off the key then turn ignition off. It is programming.

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-7.jpg

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-8.jpg

Step5. Turn key off in 15 seconds and SuperOBD SKP-900 Key Programmer will show “Adapt success”. Insert a new key in 15 seconds and turn the ignition on.

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-9.jpg

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-10.jpg

Turn off key in 15 seconds→ turn ignition on→ turn off key→ turn ignition on

Then the indicator light is off

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-11.jpg

Turn off key→ turn ignition on

Now it will show “Adapt key success” that meansSKP900 successfully program Honda CRV key when all key lost!

http://forobd2tool.com/wp-content/uploads/2017/08/1/4-12.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/4-13.jpg

http://cheapobd2scanner.com/2017/08/07/how-to-guide-skp900-program-honda-crv-key-when-all-key-lost/